TOPIC: Kerio Control Users

Yung kerio ko default settings lang kaya wala pa ko ginagalaw dun pero ganun na nangyayari. Salamat po sa tips.

May IP addressing conflict ka. Sa switched environment, lahat ng members ay dapat may common subnetwork. Base sa diagram mo, you have 2 different subnets (192.168.1.0/24 at 192.168.2.0/24). Tapos on 2 different places, you have 2 different gateways.

In addition, what sort of networking VirtualBox has? Is it bridged or NAT?

Lastly, paki-post kung yung edge router mo (PLDT) is yung 3-in-1 (modem, router, switch) na freebie ng ISP or is it a custom gateway with 2 (or more) NICs?

In the meantime, what I can suggest is to standardized your IP addressing by deploying only a single subnet. Don't forget that you deploy different subnets only if you want them to separate at Layer 3 of OSI Model which is not applicable in your setup.

Likewise, yung DNS its either yung nasa LAN-side ng router mo; o any external DNS resolver such as 8.8.8.8 or your ISP's. Hwag yung nsa WAN-side ng router (if multi-NIC).

Short and handy mnemonic:
Layer 2 - switch. one subnet. Router is not needed for communication between clients, eg 192.168.1.1/24 and 192.168.1.10/24 can talk just fine.
Layer 3 - router. multiple, diverse subnets. Router is need for clients on different subnets to see the other, eg 10.0.0.1/24 unable to talk to 192.168.0.1/24 without the help of a router.

Thanks sa feedback,

Im using PLDT fibr AN5506-04-FA

Here's the network setup
PLDT Modem/Router > Switch > Server (1 NIC only; Kerio; Timer; OBM) & Clients

On virtualbox,, naka Bridge Mode.

Magtest ulet ako kung okay na, salamat po ulet sa feedback.

Hmmm... question bakit yung PLDT modem mo na sa switch? Sa akin kasi yung PLDT modem ko connected sa KERIO PC.

DISKLESS SERVER+KERIO BOX naka bridgemode + 2 land cards

PLDT modem IP 192.168.1.1

---

connected sa 1st LAN CARD - set dynamic ip address sa Kerio BOX ---- 192.168.1.2
-set static IP sa Kerio BOX - 192.168.0.254
2nd LAN CARD IP 192.168.0.1 - Diskless IP

sa mga client ko ang makikita mo ip address ay ganito:
IP ADRESS : 192.168.0.100
SUBNET MASK: 255.255.255.0
DEFAULT GATEWAY: 192.168.0.254
DNS: 192.168.0.254

working good sa akin toh

^
1 nic lang po kasi, testing pa lang po .

gumana ba Sir?

Gumabana naman yung naging setup ko. Ang problem ko lang is pag bagong bukas yung mga client pc, ang tagal bago magkaroon ng net,. Default setting palang yung kerio so wala pa kong kinakalikot.